The Copy Menu; Copy Preset; Copy Bank - Fractal Audio MFC-101 MARK III Owner's Manual

Fractal Audio Systems MFC-­‐101 Manual
12.3 The Copy Menu
The Copy Menu is used for copying presets, banks, songs, sets, instant access switches, and internal control change
settings from one MFC-­‐101 memory location to another.
NOTE: You cannot copy an entry to itself. When a valid source and destination are selected, the ENTER footswitch
LED will flash. Press ENTER to execute the copy.
! IMPORTANT! COPY operations cannot be undone. Once you press ENTER, there is no turning back. Work carefully!
12.3.0 Copy Preset
EDIT : COPY
Copy Preset is used to copy MFC-­‐101 presets from one location to another.
PARAMETER
" footswitches to move between the Source Preset and Destination Preset parameters.
Use the !
ENTER
To execute, press . The MFC-­‐101 will display
NOTE: Copying an MFC-­‐101 preset will not change which Axe-­‐Fx Preset it loads. Axe-­‐Fx preset mapping can be modified by
changing the Axe-­‐Fx Preset Tx Map (12.4.3)
12.3.1 Copy Bank
EDIT : COPY : PAGE"
(1x)
Copy Bank is used to copy MFC-­‐101 Banks from one location to another.
PARAMETER
" footswitches to move between the Source Bank and Destination Bank parameters.
Use the !
ENTER
To execute, press . The MFC-­‐101 will display
NOTE: Since BANKS have no user editable parameters, BANK COPY is really just a way to bulk copy presets. The actual number
of presets which "reside" in a given bank at a given time (as well as the total number of banks) will depend on the global Bank
Size setting. Due to the fact that the total number of presets is not evenly divisibly by all bank sizes, the last bank may also have
fewer presets to copy TO or FROM.
NOTE: "Copying" has no effect on determining which Axe-­‐Fx presets are loaded when the MFC-­‐101 is in AXE-­‐FX MODE.
Doc v3.0
PRESET COPIED!
BANK COPIED!
and return to this menu page.
and then return to this page.
COPY MENU REFERENCE
51