Send Ia Switch Link Off Messages; Internal Cc Names; External Switch Hardware Type - Fractal Audio MFC-101 MARK III Owner's Manual

Fractal Audio Systems MFC-­‐101 Manual
12.5.15 Send IA Switch Link OFF Messages
EDIT : SETUP : PAGE"
(15x)
Send IA Switch Link OFF Messages determines whether the OFF state MIDI commands for linked IA Switches (see 12.5.14
above) are sent or not sent automatically when another linked switch in the same group is turned ON (thereby turning the
switch in question OFF automatically). Even if automatic sending is disabled, OFF messages may still be sent by stepping again
on a switch that is turned ON.
12.5.16 Internal CC Names
EDIT : SETUP : PAGE"
(16x)
Internal Control Change Name is used to set "friendly" names for Internal CCs.
PARAMETER
" footswitches step between the Internal CC number parameter and move through the individual
The !
characters of the Internal CC Name parameter.
The name of a selected Internal CC appears briefly as a memory aid when the
in any "IntCc" selection parameter on any MFC-­‐101 menu page.
12.5.17 External Switch Hardware Type
EDIT : SETUP : PAGE"
(17x)
External Switch Hardware Type is used to set up the MFC-­‐101 according to the physical type of up to four optional External
Switches—whether MOMENTARY (aka "hold") or TOGGLE (aka "latching")—which may be connected at its 2 External Switch
jacks.
PARAMETER
" switches select between External Switch Number and External Switch HW Type parameters.
The !
Doc v3.0
NAMES
footswitch is pressed while the cursor is
SETUP MENU REFERENCE
PAGE
or ! (14x)
PAGE
or ! (13x)
PAGE
or ! (12x)
67