General Use Ia Switch Saved States; Global General Use Instant Access Switches - Fractal Audio MFC-101 MARK III Owner's Manual

Midi foot controller

Hide thumbs Also See for MFC-101 MARK III:

Table of Contents

INTERNAL CCs

5.2.3 General Use IA Switch Saved States

The ON or OFF state for each General Use IA Switch is saved in each MFC-‐101 preset. This provides "scene recall"

capability where different presets cause different switches to turn on or off automatically. For example: you might

want the IA Switch controlling a midi-‐powered amp relay switch to be ON whenever you load your "Lead" preset,

and OFF when you load a "Clean Rhythm" preset. Of course, it is only the initial state that is saved; you may stomp

to change the state of any IA Switch at any time. It is also possible to set IA Switches so their state is GLOBAL, in

which case the saved setting is ignored and the switch's current state will persist across preset changes.

To set or change the saved states of IA Switches for a given preset:

Press the EDIT footswitch

Press PRESET footswitch to arrive at the PRESET menu and the Select Preset screen:

Press and/or hold INCR or DECR footswitches to select the Preset you want to edit.

Press PAGE" 2x to get to the Preset IA Switch States screen:

Tap and/or hold the INCR or DECR footswitches to select an IA Switch

Press PARAMETER" to move to ON/OFF field.

Tap the INCR or DECR footswitches to toggle the state.

Press !PARAMETER to return to step 5 to edit additional IA switch states for the selected

preset, or press !PAGE 2x to return to step 3 and select a new preset for editing, or press EXIT

to return to PERFORMANCE MODE.

5.2.4 Global General Use Instant Access Switches

General Use Instant Access Switches may optionally be set for Global operation, meaning that their states will be

retained across MFC-‐101 preset changes. This causes any Saved States (5.2.3) for the IA Switch to be ignored. After

a new preset is loaded, MIDI messages for the current state of each Global IA Switch are re-‐transmitted. See

section 12.5.11 for how to enable the GLOBAL function of any instant access switch.

IA Switches set up for Axe-‐Fx Functions (see 12.4.7) will IGNORE being set to Global. Instead, the settings in the

Axe-‐Fx are used (as usual) to set MFC-‐101 switch states (and LEDs) when each new preset is loaded.

Fractal Audio Systems MFC-‐101 Manual

Doc v3.0

Table of Contents

Need help?

Do you have a question about the MFC-101 MARK III and is the answer not in the manual?