Chapter Four Menu Setting; Operation Instruction; Main Menu; Number Programming Instruction - Honeywell VSD-361P Operation Manual

Chapter Four – Menu setting

Operation instruction

4.1
Menu operation
To make a selection, move the joystick in the UP or DOWN direction
option
.
Press OPEN or use the joystick to the Left or Right position you can change the value of your selection or enter the
submenu for the selected option
Press CLOSE to exit menu or return to the previous menu
Number
Joystick Left or Right to move the cursor under the desired numeral position
1.
Press OPEN to confirm
2.
Move the joystick Left or Right to move the cursor to select the desired number
3.
Press OPEN to confirm the selection, and the selected number will show on the corresponding position
4.
Input other Characters accordingly
5.
Press CLOSE to finalize your selection and return to the previous menu level
6.

Main Menu

4.2
Select"90" on the preset position to enter the
main configuration menu for the dome
- - - - - - - - VSD - - - - - - - -
→1.Language
2. Display Options
3. Control Options
4. Diagnostic Options
5. Camera Options
6. Function Programming
Language Setting
Different options of language are available
- - - - - - - - VSD - - - - - - - -
→1.Language
2. Display Options
3. Control Options
4. Diagnostic Options
5. Camera Options
6. Function Programming
.
.
.
.
English
IRIS CLOSE to Exit
.
English
IRIS CLOSE to Exit
The on-screen arrow points to the selected
.
.
1. Select " 90 " on the preset position to enter the main
configuration menu for the dome.
2. To make a selection move the joystick in the Up or Down direction.
The on-screen arrow points to the selected option.
Press OPEN or move the joystick Left or Right you can enter the
submenu for the selected option or change the value of your
selection.
Attention: The function of the button"OPEN" is IRIS OPEN.
3. Press the button CLOSE on the keyboard controller to exit menu
or return to the previous menu.
Attention: The function of the button "CLOSE" is IRIS CLOS.
Display Options
PreShot Position setting is to setup dome information
display and setup the PreShot position on the menu
Display Options
→1. PreShot Setup
2. Sector Setup
3. Coordinates
4. Crosshair
5. Start-Up Scr Msg
12
.
.
.
ON
Off
ON
IRIS CLOSE to Exit
.
.