Chapter Four Menu Setting; Operation Instruction; Main Menu; Display Options - Honeywell HSD-361P Operation Manual

Chapter Four – Menu setting
Operation in struction
4.1
Menu operation
To make a selection, move the joystick in the UP or DOWN direction
option
.
Press OPEN or use the joystick t
submenu for the selected option
Press CLOSE to exit menu or return to the previous menu
Number
Joystick Left or Right to move the cursor under the desired numeral position
1.
Press OPEN to confirm
2.
Move the joystick Left or Right to move the cursor to select the desired number
3.
Press OPEN to confirm the selection, and the selected number will show on the corresponding position
4.
Input other Characters accordingly
5.
Press CLOSE to finalize your selection and return to the previous menu level
6.

Main Menu

4.2
Select"90" on the preset position to enter the
main config uration menu for the dome
- - - - - - - - HSD - - -
→ 1.Language

2. Display Options

3. Control Options
4. Diagnostic Options
5. Camera Options
6. Funct ion Programming
Language Setting
Different options of language are available
- - - - - - - - HSD - - - - - - - -
1.Language
→
2. Display Options
3. Control Options
4. Diagnostic Options
5. Camera Options
6. Funct ion Programming
12
o the Left or Right position you can change the value of your selection or enter the
.
.
.
.
- - - - -
Englis h
IRIS CLOSE to Exit
.
E nglish
IRIS CLOSE to Exit
.
1. Select " 90 " on the preset positio
configuration menu for the dome.
2. To make a selection move the joystick in the Up
The on-screen arrow points to the selected option.
Press OPEN or move the joystick Left or Right you can enter the
submenu f or the selected option or change the value of your
selection.
Attention: The function of the button"OPEN" is IRIS OPEN.
3. Press the button CLOSE on the ke
or return to the previous menu.
Attenti on: The function of the button "CLOSE" is IRIS CLOS.
Display Options
PreShot Position setting is to setup dome information
display and setup the PreShot position on the menu
Display Options
→
1. PreShot Setup
2. Sector Setup
3. Coordinates
4. Crosshair
5. Start-U
The on-screen arrow points to the selected
.
.
.
.
n to enter the main
yboard controller to exit menu
ON
Off
p Scr Msg ON
IRIS CLOSE to Exit
.
or Down direction.
.