Sony SRW-9000 Operation Manual page 142

To use 32 scene files
Set 32 SCENE FILE to ON on the <OTHERS 2>
page of the MAINTENANCE menu.
Note
If you return "32 SCENE FILE" to OFF, all scene files
No. 6 to 32 are initialized when you next set it to ON.
(Scene files No. 1 to 5 are maintained.)
Items stored
The items that are stored in scene files are marked
with "√" in the "S" column of the table in "List of
Items Stored in Files" (page 143).
Reference files
Reference files store standard settings that can be
used as reference settings when adjusting the unit.
If STANDARD is executed on the <SCENE
FILE> page of the PAINT menu or the
<REFERENCE> page of the FILE menu, or with
the MSU-900/950 Master Setup Unit, manually
adjusted values are reset to the reference values
stored in the current reference file.
At shipment, a reference file with the initial
settings is stored in built-in memory.
The initial settings can be modified, as required,
and then stored in a new reference file.
For file operations, use the <REFERENCE> page
of the FILE menu. You can also use the MSU-
900/950 Master Setup Unit for file operations.
You can back up reference files on "Memory
Stick" media.
Notes
• In Cine mode, reference file data is fixed as the factory
default settings and cannot be modified.
• The adjustment values stored in scene files are relative
to reference file data. If the data in the reference file is
modified, the scene files must also be modified.
Items stored
The items that are stored in reference files are
marked with "√" in the "R" column of the table in
"List of Items Stored in Files" (page 143).
User-Gamma files
You can create gamma curve data (user gamma)
using the CvpFileEditor application, and load it
into this unit from a "Memory Stick". This makes
it easier to reproduce the look that you want on
this unit.
For file operations, use the <USER GAMMA>
page of the FILE menu.
142 File Configuration
User gamma files are stored in built-in memory.
They cannot be backed up to "Memory Stick"
media.
Note
In Cine mode, you cannot load user gamma files from
"Memory Stick" media.
OHB files
OHB files store the offset values of items specific
to the CCD unit. For file operations, use the
<OHB FILE> page of the FILE menu. You can
also use the MSU-900/950 Master Setup Unit for
file operations.
Note
In Cine mode, an OHB file can be retrieved
automatically, but the data in the OHB file cannot be
modified.
Items stored
The items that are stored in OHB files are marked
with "√" in the "O" column of the table in "List of
Items Stored in Files" (page 143).