To store the data as a lens file in built-in
memory
As required, set the items marked with “√” in the
L column of the table in “List of Items Stored in
Files” (page 143) to the state that you want to
store.
1
For a non-serial lens, select the file
number, and set the file name and the
minimum f-stop.
For details about setting file names, see
“Specifying a character string” (page 91).
Note
This step is not required for a serial lens
because these settings are made
automatically.
2
Move the pointer to STORE FILE and
press the MENU SEL/ENTER dial.
Storage of the position settings for the center
marker can be performed independently.
You can check the effect of the WHITE R/B
compensation that has been set in the file, by
changing the setting for WHITE R/B to OFF.
Note
The WHITE R/B item is provided only for checking the
effect of compensation (comparison between when the
file is used and not used). The file cannot be stored with
WHITE R/B set to OFF.
To write the date or retrieve it from a
“Memory Stick”
Move the pointer to LENS MS READ/WRITE
and press the MENU SEL/ENTER dial. The
following subpage appear.