Sony SRW-9000 Operation Manual page 73

Setting window
4
Select the desired value by turning and
pressing the SELECT/ENTER dial.
This returns you to the submenu window,
which is activated again.
5
Repeat steps 3 and 4 to set the FRAME
and SIGNAL items.
6
In the submenu window, select [SET].
7
Confirm the format, move the cursor to
"OK", and then press the SELECT/
ENTER dial.
A message appears to inform you that the
format has been selected, and you return to
the HOME screen.
To set with OTHERS
1
Press the menu selection button
"SYSTEM" on the control panel.
The SYSTEM Setup menu appears.
2
Turn the SELECT/ENTER dial to
move the cursor to OTHERS, and then
press the dial.
A submenu window appears.
3
Turn the SELECT/ENTER dial and
select FORMAT LIST in the submenu
window.
The format list screen appears.
A bar appears for formats that cannot be
used. A yellow check mark appears for
formats that can be used, and the current
format flashes.
4
Move the cursor to the format you want
to use.
To move the cursor left and right
Turn the SELECT/ENTER dial.
To move the cursor up and down
Turn the SELECT/ENTER dial with the
FUNC button held down.
5
Press the SELECT/ENTER dial.
"CANCEL" and "OK" appear at the bottom
of the screen.
6
Move the cursor to "OK", and then
press the SELECT/ENTER dial.
A message appears to inform you that the
format has been selected, and you return to
the HOME screen.
Detailed Video Format Settings 73