Setting The Camera Outputs; Selecting Video Output Signals For The Connectors - Sony SRW-9000 Operation Manual

the maximum setting value. If the FPS value is set to a
1
value lower than / of the maximum setting value, the
2
error message "AWB: LOW FPS" appears and the
automatic adjustment is not performed.
Example: The maximum FPS value for shooting at
S23.98PsF is 24. In this case, set the FPS value to
13 or higher. The maximum FPS value for shooting
at 59.94PsF is 60. In this case, set the FPS value to
31 or higher.
To use the <AUTO SETUP> page of the
MAINTENANCE menu
Referring to the procedure in "Setting the Built-in
Clock" (page 39), select the MAINTENANCE
menu in the <TOP MENU> screen and display
the <AUTO SETUP> page.
Move the cursor to AUTO WHITE, and then
press the MENU SEL/ENTER dial.
Select "EXEC" when a confirmation message
appears.
For details on Camera menu operations, see "Basic
Camera Menu Operations" (page 123).
To use the assignable switch
If AWB is assigned to assignable switch 4, push
the switch up to "4", then release it.
For details on assigning a function to the switch, see
"Assigning Functions to Assignable Buttons/Switch"
(page 51).
To use a remote control unit
When the RM-B750 or RM-B150 Remote
Control Unit is connected to the REMOTE
connector, press the AWB button.
56

Setting the Camera Outputs

Setting the Camera
Outputs
Selecting Video Output Signals
for the Connectors
You can select the types of video signals to be
output to the HD SDI MON1, HD SDI MON2,
TEST OUT, and REMOTE connectors.
Use the <MONITOR OUTPUT> page of the
Camera >USER (OPERATION) menu.
<MONITOR OUTPUT> page
COLOR
When you select COLOR, all R, G, and B
channels will be output.
Single-channel output of R, G, or B is also
possible.
MON
You can select the signals to be monitored with
video monitors connected to the HD SDI MON1
and HD SDI MON2 connectors.
Setting Output
MON Regardless of the VF settings,
characters or markers can be
added independently to the
video output signals (default).
VF Video signals that are output
to the VF connector (camera
images with character data for
the setting menus, status
displays and so on).
TEST
You can select the signals to be output to a video
monitor or waveform monitor connected via the
TEST OUT connector.