Sony SRW-9000 Operation Manual page 85

To select time data to display during
playback
Proceed as follows to select the type of time data
to display during playback.
1
Display the TC Setup menu. (See "To
display the TC Setup menu" (page 79).)
2
Select TIMER SEL.
The TIMER SEL settings window appears.
(See "To select the type of time data to
display" (page 80).)
3
Turn the SELECT/ENTER dial to
select CTL, TC (timecode), or UBIT
(user bits).
CTL: Display CTL signals recorded on the
tape.
TC: Display TC or VITC read by the internal
timecode reader.
The TCR SEL item in the TC Setup
menu allows you to determine whether
the timecode reader is to read LTC or
VITC.
UBIT: Display user bit values inserted into
the playback timecode.
4
Press the SELECT/ENTER dial.
To play back with tracking control
Tracking control can be manually operated or
automatically optimized.
To play back with manual tracking control, use
the following procedure.
1
Insert the cassette to play back and
press the PLAY button.
2
In the VTR >SYSTEM Setup menu
select SERVO >TRACKING, and press
the SELECT/ENTER dial.
A setting window opens.
3
Turn the SELECT/ENTER dial to
select "VARI", and press the dial.
The "CH.COND" indication in the HOME
screen flashes in yellow.
4
Select ADJUST and press the SELECT/
ENTER dial.
The Tracking Adjust window appears.
5
While viewing the channel condition
display, turn the ADJUST knob or
SELECT/ENTER dial to adjust so that
the channel condition display lights in
green.
To release tracking control
Eject the cassette, or power the system off.
The setting of SERVO >TRACKING in the
SYSTEM Setup menu returns to "UNITY".
Playback – Checking the Recording 85