Sony SRW-9000 Operation Manual page 23

Name
REC button and indicator
REW (rewind) button and
indicator
F FWD (fast forward)
button and indicator
Pressed alone
Pressing PLAY button with this
button held down starts recording.
(The indicator lights during
recording.) Pressing the button
with recording paused in standby
off mode puts the unit into standby
on mode. If you press this button
during playback, fast forward, or
rewind, the unit enters E-E
a)
mode. In this mode you can
b)
monitor E-E signals output from
the HD SDI OUT A/B connectors
or the HD SDI MON 1/2
connectors.
Rewinds the tape. (The indicator
lights during rewinding, and goes
out when the rewinding is
finished.) When the REW button is
pressed again during rewinding,
the operation changes to search, in
the same way as when the button is
pressed together with the FUNC
button (searching at the speed in
effect when the most recent search
was interrupted).
Fast forwards the tape. (The
indicator lights during fast
forwarding, and goes out when the
fast forwarding is finished.) When
the F FWD button is pressed again
during fast forwarding, the
operation changes to search, in the
same way as when the button is
pressed together with the FUNC
button (searching at the speed in
effect when the most recent search
was interrupted).
Pressed with FUNC button
Temporarily memorizes the time data of the
current position (Mark In). Mark In data is
displayed in the format "IN: xx:xx:xx:xx" in
the time data field of the display, and can be
used for cueup.
Note
The Mark In data is only temporarily
memorized in the unit's internal memory. It is
erased when you eject the cassette.
Executes reverse direction searches. With
each press, the search speed changes in the
order × 2 t × 5 t × 8 t × 2 normal
speed.... If a search is interrupted by another
operation, the next search is performed at the
speed in effect at the time of the interruption.
Note
When you are using the unit at the 880 Mbps
recording rate, × 8 normal speed search is
disabled.
For details on recording rates, see FORMAT
>SIGNAL in the SYSTEM Setup menu (page
136).
Executes forward direction searches. With
each press, the search speed changes in the
order × 2 t × 5 t × 8 t × 2 normal
speed.... If a search is interrupted by another
operation, the next search is performed at the
speed in effect at the time of the interruption.
Note
When you are using the unit at the 880 Mbps
recording rate, × 8 normal speed search is
disabled.
For details on recording rates, see FORMAT
>SIGNAL in the SYSTEM Setup menu (page
136).
Locations and Functions of Parts 23