Detailed Shutter Settings - Sony SRW-9000 Operation Manual

Detailed Shutter
Settings
When you turn this unit's Electronic Shutter
function on, you can control the shutter by
selecting either shutter angles or shutter speeds
(seconds).
You can use the subdisplay for normal shutter
switching, and make more detailed settings on the
<SHUTTER> page of the Camera >USER
(PAINT) menu. The menu allows you to set the
shutter on a page that displays the shutter angle
(degrees), the shutter speed (seconds), and the
shutter mode.
<SHUTTER> page
SHUTTER
The [deg] field displays the currently selected
shutter angle, and the [sec] field displays the
speed (in seconds), converted according to the
current frame rate.
STEP (Step mode)
To select a value that has been registered as a
shutter step, move the cursor to this line.
Turn the MENU SEL/ENTER dial to display
registered shutter values in the [deg] and in [sec]
fields.
CONTINUOUS (Continuous mode)
To fine-adjust the selected shutter step value or
use a value that has not been registered, move the
cursor to this line.
The values in the [deg] and [sec] columns change
continuously when the MENU SEL/ENTER dial
is turned.
STEP ASSIGN
You can add and delete shutter step values in the
same way as with the <SHUTTER ASSIGN>
66

Detailed Shutter Settings

page (see page 99) of the Camera >USER
(OPERATION) menu.
ADD: After a Continuous mode operation to
specify a shutter value in the [deg] field, you
can use ADD to register that value as a new
shutter step. If eight shutter step values have
been already registered, "STEPS FULL"
appears, and the new value is not registered.
In that case, use DELETE to delete an
unneeded shutter step value and try again.
DELETE: Deletes the shutter step value
displayed in the [deg] field by a step
operation.
See "Shutter Settings" (page 41) for more
information about shutter steps.