Sony SRW-9000 Operation Manual page 12

optional VCT-14 Tripod Attachment to mount
the unit on a tripod.
Assignable buttons/switch
The unit is equipped with 10 assignable buttons/
switch on the side panel. For easier operation
during shooting, you can assign frequently used
functions to these switches. You can also assign
basic VTR control functions such as STOP,
PLAY, and REW, which allows you to control
tape transport without using the control panel.
Rich Selection of Functions
Two operation modes: Cine and Custom
This unit offers two operation modes: Cine mode,
for film-like shooting, with adjustments normally
being made in post production, and Custom
mode, for users who wish to obtain a specific look
by adjusting parameters on the set.
Monitor output functions
The unit provides a wide range of monitor output
functions, including mixing of characters and
markers into monitor output, mixing of camera
and playback video, and separate gammas for
monitor and main line.
Down converter
A down converter is provided as a standard
feature, allowing you to monitor camera and VTR
playback video as SD composite on an SD
monitor.
Dual link output (and 12-channel audio input)
Addition of the optional HKSR-9001 HD-SDI
Expansion Board makes dual link output
available (RGB 4:4:4 and 1080/30PsF, or YCbCr
4:2:2 and 1080/60P).
With this optional board installed, you can also
input 12 channels of audio.
Shutter control
When adjusting the electronic shutter, you can
display shutter settings as shutter angles (in
degrees) or shutter speeds (in seconds).
Image inversion function
The image inversion function allows you to
cancel out the image inversion that occurs when a
cine-lens converter is used.
Removable control panel
The control panel is independent of the unit,
allowing it to be installed in the most convenient
location in your operating environment. It can be
12 Features
held in the hand and operated like a remote
controller.
AP-1 Assistant Panel (optional)
The optional AP-1 Assistant Panel provides the
same functions as the control panel on the right
side of the unit. It enables convenient control of
basic camera operations such as shutter control
(indication in degrees possible), gain and color
temperature settings (selection of Tungsten and
Daylight possible), timecode and tape remaining
checks, control of character display, and
assignment of functions to the assignable buttons/
switch.
Per-channel audio level adjustments
You can check peaks and adjust audio playback
and recording levels independently on all 12
audio channels.