Sony SRW-9000 Operation Manual page 136

Item
FORMAT
Signal format settings
TEST SG
Test signal output settings
Note
Both VIDEO and AUDIO
settings return to OFF
(factory default setting)
when you power the system
off.
136 VTR Menu List
Settings
LINE Sets the number of effective lines and the scanning system.
1080I [1080I]
1080P [1080PsF/P]
FRAME Sets the operation frame frequency.
23.98 [23.98]: Frame frequency 23.976 Hz
24 [24]: Frame frequency 24 Hz
25 [25]: Frame frequency 25 Hz (field frequency 50 Hz)
29.97 [29.97]: Frame frequency 29.97 Hz (field frequency
50 [50]: Frame frequency 50 Hz
59.94 [59.94]: Frame frequency 59.94 Hz
SIGNAL Sets the sampling method and video signal recording rate.
422 [4:2:2]: 4:2:2 (Y/Pb/Pr), 440 Mbps (880 Mbps for 50P
444SQ [4:4:4 SQ]: 4:4:4 (R/G/B), SQ mode, 440 Mbps
444HQ [4:4:4 HQ]: 4:4:4 (R/G/B), HQ mode, 880 Mbps
Notes
• "444SQ" and "444HQ" are displayed when the optional
HKSR-9003 is installed.
• Tapes recorded with the 444HQ setting cannot be played back
on the SRW-5000/5500. Also, certain limitations apply to
when tapes recorded in other 880 Mbps formats are played
back on the SRW-5000/5500.
For details, see "About Recording/Playback Formats"
(page 164).
AUDIO Selects the test signal generated by the internal audio signal
generator.
OFF [Off]: Generate no test signal.
1KHz [1KHz Sine]: Generate a sine wave signal of 1 kHz.
NONE [Silence]: Generate a silent signal.
59.94 Hz)
or 59.94P)
(880 Mbps for 50P or 59.94P)