Shooting - Sony SRW-9000 Operation Manual

2
Turn the SELECT/ENTER dial to
move the cursor to the digit you want to
change, and press the dial.
3
Turn the SELECT/ENTER dial to
change the value of the selected digit,
and press the dial.
4
Repeat steps 2 and 3 until the desired
value is displayed.
5
Turn the SELECT/ENTER dial to
move the cursor to SET, and press the
SELECT/ENTER dial.
TeleFile recording
This system records the following TeleFile data
to cassette labels with each recording operation.
• IN (recording start point)
• OUT (recording end point)
• Tape format
• Duration (time from In point to Out point)
• File name (automatically assigned file name in
the format HDCAMSR_00X)
Note
TeleFile data may not be saved correctly if the POWER
ON/OFF switch is set to the OFF position within one
second after the end of recording.
When the number of files exceeds 70
Old files are deleted before new files are added.
To delete all or selected files, use the SRW-5000/
5500 to format the memory label or carry out a
file deleting operation
82 Recording

Shooting

1
Push the assignable 4/AUTO BLK BAL
switch to AUTO BLK BAL to adjust the
black balance.
For details of black balance adjustment, see
"Adjusting the Black Balance" (page 51).
2
Select the CC filter and ND filter to
match the lighting conditions, and
adjust the white balance.
For details, see "Adjusting the White Balance
(in Custom Mode)" (page 51).
3
Aim the camera at the subject and
adjust the focus and zoom.
4
If necessary, set the electronic shutter to
an appropriate mode and speed.
For details, see "Shutter Settings" (page 41).
5
To start recording, press the RUN
button on the main unit or the REC +
PLAY buttons on the control panel.