Setting The Camera Outputs - Sony HDC2500 Operation Manual

• The area marker and the aspect safety marker cannot be
displayed simultaneously, whichever you set to ON later is
preferentially displayed.
• When displaying the focus assist indicators, check that the
flange focal length has been precisely adjusted.
See "Adjusting the Flange Focal Length" on page 19 for the
flange focal length.
Setting the Camera
Outputs
You can specify video signals directly output from the camera,
with menu operations.
Note
The MAIN (camera picture), RET (return video), or VF (the
same picture as that displayed on the viewfinder screen)
setting is common to SD-SDI and VBS. Different signals
cannot be output.
The menu pages used for the output settings have been
registered to the USER menu at the factory.
• <OUTPUT FORMAT>
• <TEST OUT>
• <SDI OUT>
Set the following menu items to the settings shown in the
table.
For details on menu operations and the USER menu, see
"Menu Operations" on page 32.
Outputting the signal being shot (camera
picture)
The same textual information as that displayed on the
viewfinder screen can be added to the output signal by setting
CHARACTER to "ON" on the <SDI OUT> or <TEST OUT>
page.
To output as HD-SDI
Menu page Item
<SDI OUT> SDI-MONI OUT
To output as SD-SDI
Menu page Item
<SDI OUT> SDI-MONI OUT
DOWN CONVERTER
SELECT
To output as VBS
Menu page Item
<TEST OUT> OUTPUT
DOWN CONVERTER
SELECT
Setting
MAIN
Setting
SD-SDI
MAIN
Setting
VBS
MAIN
29

Setting the Camera Outputs