Expansion cards, interposer boards and battery backup units
Figure 135: Installing the riser card (A)
Ê Install the riser card into its bracket.
I
Make sure that the riser card engages onto the centering bolts.
Figure 136: Installing the riser card (B)
Ê Secure the riser card with four screws.
6.8.1.5
Concluding steps
Perform the following steps:
"Installing the GPGPU riser module" on page 54
Ê
"Installing a TESLA GPGPU card" on page 130
Ê
"Installing the server node in the server enclosure" on page 62
Ê
Ê If applicable, reconnect all external cables.
"Switching on the server node" on page 63
Ê
"Enabling boot watchdog functionality" on page 74
Ê
CX270 S2
Upgrade and Maintenance Manual
(if applicable)
205