Installing The Xeon Phi Air Tunnel - Fujitsu Primergy CX270 S2 Upgrade And Maintenance Manual

Expansion cards, interposer boards and battery backup units
6.5.4.8

Installing the Xeon Phi air tunnel

Figure 94: Installing the Xeon Phi air tunnel
Ê Place the air tunnel on the rear of the Xeon Phi (see arrow).
Ê Secure the air tunnel with one screw (see circle).
Screw type: 6-32 x 4.7 mm
6.5.4.9 Concluding steps
Perform the following steps:
"Installing the cables" on page 57
Ê
I
For a complete cabling overview, please refer to section
overview" on page
"Installing the server node in the server enclosure" on page 62
Ê
Ê If applicable, reconnect all external cables.
"Switching on the server node" on page 63
Ê
"Enabling boot watchdog functionality" on page 74
Ê
160
304.
Upgrade and Maintenance Manual
"Cabling
CX270 S2