Connecting The Power Cable To The Interposer Board - Fujitsu Primergy CX270 S2 Upgrade And Maintenance Manual

Expansion cards, interposer boards and battery backup units
Figure 113: Installing the NVIDIA GRID GPU card (C)
Ê Firmly secure the NVIDIA GRID GPU card with two screws (see circles).
Ê Connect the GPGPU cable and then route the cables as shown and use the
cable clamps on the air duct (see arrows).
6.5.7.6

Connecting the power cable to the interposer board

Figure 114: Connecting the GPGPU power cable to the interposer board
Ê Secure the NVIDIA GRID GPU card with the screw (see circle).
Ê Connect the GPGPU power cable to the interposer board.
182 Upgrade and Maintenance Manual
CX270 S2