Installing The Processor Heat Sink; Concluding Steps - Fujitsu Primergy CX270 S2 Upgrade And Maintenance Manual

8.3.4

Installing the processor heat sink

There are two different types of heat sinks.
Figure 177: Heat sink types
1 Heat sink for CPU0
Ê Remove the protective cover from the heat sink.
I
Ensure not to touch the thermal paste on the bottom of the heat sink.
Ê Install the processor heat sink as described in section
processor heat sink" on page
8.3.5

Concluding steps

Perform the following steps:
"Installing the air duct brackets" on page 53
Ê
"Installing the GPGPU riser module" on page 54
Ê
"Installing the air duct" on page 55
Ê
"Installing a TESLA GPGPU card" on page 130
Ê
"Installing the cables" on page 57
Ê
"Installing the server node in the server enclosure" on page 62
Ê
CX270 S2
253.
Upgrade and Maintenance Manual
2 Heat sink for CPU1
"Installing the
(if applicable)
Processors
261