Fujitsu Primergy CX270 S2 Upgrade And Maintenance Manual page 294

System board and components
Figure 199: Closing socket release lever 1
Ê Close the socket release lever marked Open 1st (1) and latch it under the
load plate retention tab (2).
Ê If applicable, install the second processor accordingly.
Applying thermal paste
Ê If you are reusing the CPU heat sink of the defective system board module,
apply thermal paste as described in
Installing CPU heat sinks
Ê Install the CPU heat sinks on the new system board module as described in
"Installing the processor heat sink" on page
Installing protective socket covers on the defective system board module
I
Since the defective system board is sent back for repair, protect the
delicate processor socket springs with a socket cover.
294 Upgrade and Maintenance Manual
"Applying thermal paste" on page
253.
251.
CX270 S2