Replacing A Xeon Phi; Required Tools; Preliminary Steps; Removing The Xeon Phi - Fujitsu Primergy CX270 S2 Upgrade And Maintenance Manual

Expansion cards, interposer boards and battery backup units
6.5.6

Replacing a Xeon Phi

Upgrade and Repair Units (URU)
Average hardware task duration: 10 minutes
Average software task duration: 5 minutes
6.5.6.1

Required tools

Preliminary and concluding steps: tool-less
●
Replacing a Xeon Phi:
●
– Phillips PH2 / (+) No. 2 screw driver
6.5.6.2

Preliminary steps

Perform the following steps:
"Disabling SVOM boot watchdog functionality" on page 65
Ê
Ê Locate the desired server node with the ID button.
"Shutting down the server node" on page 43
Ê
"Removing the server node from the server enclosure" on page 44
Ê
"Removing the cables" on page 45
Ê
6.5.6.3

Removing the Xeon Phi

Ê Remove the Xeon Phi power cable as described in section
the Xeon Phi power cable from the interposer board" on page
Ê Remove the Xeon Phi as described in section
slot 3" on page
6.5.6.4

Installing the Xeon Phi

Ê Prepare the Xeon Phi as described in section
page 150.
CX270 S2
161.
Upgrade and Maintenance Manual
"Disconnecting
164.
"Removing a Xeon Phi out of
"Preparing a Xeon Phi" on
173