Removing The Server Node From The Server Enclosure - Fujitsu Primergy CX270 S2 Upgrade And Maintenance Manual

Basic hardware procedures
4.2 Removing the server node from the server
enclosure
V
CAUTION!
Shut down the server node and disconnect all external cables.
●
Follow the safety instructions in the chapter
●
on page
Figure 2: Removing the server node
Ê Undo the locking mechanism (1) of the release lever and pull the server
node out of the slot (2).
44
31.
Upgrade and Maintenance Manual
"Important information"
CX270 S2