Nvidia Grid: Installing A Sas Raid Controller - Fujitsu Primergy CX270 S2 Upgrade And Maintenance Manual

Expansion cards, interposer boards and battery backup units
"Installing the server node in the server enclosure" on page 62
Ê
Ê Reconnect all external cables.
"Switching on the server node" on page 63
Ê
"Updating RAID controller firmware" on page 73
Ê
"Enabling boot watchdog functionality" on page 74
Ê
6.4.1.7

NVIDIA GRID: Installing a SAS RAID controller

I
If a NVIDIA GRID GPU is installed in your system, the installation of a
SAS RAID controller is different because of the diverse cable routing of
the NVIDIA GRID GPU.
The cables of the TESLA GPGPU are guided upwards, see figure
figure 69 on page
The cables of the NVIDIA GRID GPU are guided downward, see figure
figure 112 on page
Figure 61: Installing a controller card
Ê Follow the instructions described in chapter
on page 114.
Ê Install a SAS RAID controller above the GPGPU cables.
I
After the installation follow the instructions described in chapter
"Concluding steps" on page
CX270 S2
134.
181.
122.
Upgrade and Maintenance Manual
"Installing SAS RAID controller"
123