Expansion cards, interposer boards and battery backup units
Figure 132: Installing the riser card (B)
Ê Secure the riser card with a screw.
6.7.1.5
Concluding steps
Perform the following steps:
"Installing expansion cards" on page 103
Ê
"Installing SAS RAID controller" on page 114
Ê
"Installing the riser module" on page 60
Ê
"Installing the server node in the server enclosure" on page 62
Ê
Ê If applicable, reconnect all external cables.
"Switching on the server node" on page 63
Ê
"Enabling boot watchdog functionality" on page 74
Ê
202
Upgrade and Maintenance Manual
(if applicable)
(if applicable)
CX270 S2