Table of Contents
Advertisement
e-STUDIO 16P
Using Hex Trace Mode
When unexpected characters print or characters are missing, use
Hex Trace to help you determine if there is a problem with the
language interpreter or the cable. Hex Trace isolates printing
problems by telling you what information your printer is receiving.
1. Enter the special function menu. See
Function Menu" on page 2-71 1
2. Press and release the operator panel button twice quickly
(double-button press) three times until the Paper Jam LED D
comes on and the two bottom LEDs blink.
3. Press the operator panel button with a long button press (hold
until all the LEDs come on) to select the Hex Trace setting.
4. Press the operator panel button with another long button press
to initiate Hex Trace.
Data sent to the printer is printed out in hexadecimal and character
representation to help isolate the source of the problem.
To exit Hex Trace mode, turn off the printer or press the operator
panel with a long button press.
"Using the Special
for more information.
Hex Trace setting.
Diagnostic Information
2-73
Advertisement
Table of Contents
