Table of Contents
Advertisement
e-STUDIO 16P
Off/On/Auto
Setting Value
USB port is disabled. The printer doesn't receive
data from the USB port.
USB port is enabled with a fixed buffer size. The
with a fixed buffer size. The
buffer size is set from a utility such as MarkVision.
Note: This LED state is only displayed if the current
value for the USB Port Enabled setting is a fixed
Port Enabled setting is a fixed
value. The user can't set the value by pressing the
button to cycle from the off value to the on value,
that is, the button press cycles from off to auto.
USB port is enabled with an automatic buffer size.
The printer determines the buffer size based on
available memory and other printer settings.
3-35
Diagnostic Aids
Advertisement
Table of Contents
