Toshiba e-STUDIO 16P Service Manual page 112

e-STUDIO 16P
Print Directory y
Print directory is not supported by the operator panel. It is supported
by issuing a PJL command.
Format Flash
Format flash is not supported by the operator panel. It is supported
by issuing a PJL command.
Set Demo Mode Active/Inactive
The power–on default for the printer may be switched between
normal and demo by activating/deactivating demo mode toggle.
Go to the Special Function Menu (see
following:
1. Select Toggle Demo mode by double pressing the operator
panel button until the Ready and Load Paper LEDs are on.
2. Perform a long button press until all LEDs are on solid.
Print Registration Adjustment
•
Adjust the left margin until the registration box illustrated on the
diagnostics test page is centered on the page.
•
Adjust the top margin until the registration lines located at the
bottom of the diamonds at the bottom of the page fall on the
bottom edge of the page.
These settings may be modified by issuing PJL DEFAULT
commands when the printer is in normal mode. The PJL variables
used to describe registration are LLEFTMARGINOFFSET and
LTOPMARGINOFFSET.
Menu (see page 3-11
y double pressing the operator
ARGINOFFSET and
3-11) and perform the
Diagnostic Aids
3-19