Table of Contents
Advertisement
e-STUDIO 16P
Host Interface Error
This error is generated when the printer detects an error
communicating with the host computer. There are three causes of
this error:
•
Parallel ENA Connection Lost –
During the printers power–on cycle, it detects that the
connection to an external network adapter has been lost. Once
a connection is initially established, a printer setting is modified
to note that the connection exists. Then, each time the power is
cycled on the printer, if the setting states a connection exists,
the printer attempts to communicate with the adapter. If the
adapter does not respond, this message is posted.
This error is only detected during the power–on cycle. This
means if the external network adapter connection is lost after
the power–on cycle is complete, this error is not detected. The
printer cannot distinguish between an adapter which is quiet, for
example, not sending any data, and an adapter which has been
disconnected.
Error
Lost –
Diagnostic Information
quiet, for
2-5
Advertisement
Table of Contents
