Toshiba e-STUDIO 16P Service Manual page 127

e-STUDIO 16P
USB Port
This menu item lets the user enable or disable the USB port. If the
port is not being used, disabling it frees allocated memory to be
used to process print jobs.
Perform the following steps to change the USB Port setting:
1. Enter the configuration mode. See
page 3-14
2. Perform a double click button press eight times. This moves to
the USB Port item on the configuration menu. The USB Port
(Paper Jam) LED is blinking.
3. The current USB Port setting is indicated by the Off/On/Auto
(Press Button) LED. When the LED is off, the USB Port is
disabled. When the LED is blinking, the USB Port is enabled.
Perform a brief button press to select a different USB Port
setting.
4. Perform a long button press. All LEDs blink once, indicating the
setting is saved.
5. Exit the configuration mode by turning the printer power off.
3-34
Service Manual
jobs.
for more information.
LED is blinking.
utton press to select a different USB Port
"Configuration Mode
y the Off/On/Auto
k once, indicating the
Mode" on
rt is