Toshiba e-STUDIO 16P Service Manual page 129

e-STUDIO 16P
USB NPA Mode
USB NPA mode allows for two way communication between the host
computer and the printer. puter and the printer.
Perform the following steps to change the USB NPA setting:
1. Enter the configuration mode. See
page 3-14 4
2. Perform a double click button press nine times. This moves to
the USB NPA mode item on the configuration menu. The USB B NPA mode item on the configuration menu. The USB
NPA (Error) LED is blinking.
3. The current USB NPA setting is indicated by the Off/On/Auto
(Press Button) LED.
•
When the LED is off, the USB port does not search for NPA
data within the received data.
•
When the LED is blinking, the USB port searches for
optional NPA data within the received data.
•
When the LED is on solid, the USB port requires that data
sent to the printer be in NPA format.
4. Perform a brief button press to select a different USB NPA
setting.
5. Perform a long button press. All LEDs blink once, indicating the
setting is saved.
6. Exit the configuration mode by turning the printer power off.
3-36
Service Manual
for more information.
D is blinking.
ED is on solid, the USB port requires that data
"Configuration Mode" on
USB port searches for
LEDs blink once, indicating the
Off/On/Auto
ch for NPA