Toshiba e-STUDIO 16P Service Manual page 35

e-STUDIO 16P
Optional Memory Service Error Code Memory Service Error Code
The operator panel button has been pushed and a memory service
error has occurred.
Once the error code is displayed, if the operator panel button is
pushed again, the operator panel displays the service error
indication – all 6 indicator LEDs blinking. Continual pressing of the
operator panel button causes the LEDs to repeat in the following
order:
1. Service error indication
2. Optional memory service error code indication
3. Service error indication
Replace the optional memory DIMM. If this does not correct the
problem, replace the Code Overlay ROM, Flash SIMM or the
controller board.
2-18
Service Manual
MM. If this does not correct the
wing