Table of Contents
Advertisement
e-STUDIO 16P
Mirror Motor Failure Service Error Code
Failure Service Error Code
The operator panel button has been pushed and a mirror motor
failure service error has occurred.
Once the error code is displayed, if the operator panel button is
pushed again, the operator panel displays the service error
indication – all 6 indicator LEDs blinking. Continual pressing of the
operator panel button causes the LEDs to repeat in the following
order:
1. Service error indication
2. Mirror motor failure service error code indication
3. Service error indication
Inspect the printhead cable and replace the assembly as necessary.
If this does not correct the problem, replace the engine/LVPS board.
/LVPS board.
Diagnostic Information
wing
2-17
Advertisement
Table of Contents
