Table of Contents
Advertisement
e-STUDIO 16P
Problem
Faint images or repetitive spots
appear on the page.
Pages are blank.
The printer has missing or
damaged parts.
The operator panel LEDs do not
come on when the printer is
turned on.
The top cover does not close.
EDs do not
Action
• Select a different media type or
form type setting from your printer
driver.
• Try a different type of paper. Paper
designed for copiers gives the
best quality.
• Replace the print cartridge.
• The print cartridge may be out of
toner or defective. Replace the
cartridge.
• You may have a software error. Try
turning the printer off and back on.
Contact the place where you bought
your printer.
• The LEDs may take a few
seconds to come on.
• Make sure the power cord is firmly
plugged in at the back of the
printer and at the electrical outlet.
Make sure the print cartridge is
positioned correctly.
Diagnostic Information
2-65
Advertisement
Table of Contents
