Basic Trace Setting (Basic Trace); Basic Expansion Mode (Expand Mode) - Toshiba B-EP2DL Series System Mode Manual

4. SYSTEM MODE (For Service Persons and System Administrators)
4.10.4

BASIC Trace Setting (BASIC TRACE)

TRACE OFF
[PAUSE]
TRACE ON
[PAUSE]
Notes:
1. When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
2. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
4.10.5

BASIC Expansion Mode (EXPAND MODE)

The BASIC expansion mode program runs under the following conditions:
1. The BASIC expansion mode program has already been loaded.
2. The BASIC interpreter setting is set to ON (enabled).
When executing the BASIC expansion mode program
EXPAND MODE
[POWER]
After the BASIC expansion mode is started, LCD display and operations depend on the BASIC
expansion mode program.
Notes:
1. The BASIC expansion mode ends when the BASIC expansion program is exited.
2. When the [POWER] key is pressed without the BASIC expansion mode program loaded, the display
does not change from "<9>BASIC SETTING" which indicates the BASIC expansion mode menu.
When the BASIC expansion mode program is exited or not loaded.
EXPAND MODE
[POWER]
<9>BASIC SETTING
3. For details of the BASIC expansion mode, refer to the section, "Startup of System Mode Program" in
"the BASIC Interpreter Specification".
Disabled (Factory default)
Enabled
(1) System mode menu display (BASIC ecpansion mode)
(2) Press the [POWER] key.
BASIC expansion mode
Press the [POWER] key.
System mode menu display (BASIC setting)
4- 114
EO13-33005
4.10 BASIC Setting