e-STUDIO 16P
ASIC SRAM Failure Service Error Code
RAM Failure Service Error Code
The operator panel button has been pushed and an ASIC SRAM
failure service error has occurred.
Once the error code is displayed, if the operator panel button is
pushed again, the operator panel displays the service error
gain, the operator panel displays the service error
indication – all 6 indicator LEDs blinking. Continual pressing of the
operator panel button causes the LEDs to repeat in the following
order:
1. Service error indication
2. ASIC SRAM failure service error code indication
3. Service error indication
Replace the controller board.
Diagnostic Information
2-23