2. SYSTEM MODE
2.8.1 Basic Specification Selection Mode
This parameter is to choose whether to enable the BASIC specification function or not.
When "<8>BASIC" appears, press the [PAUSE] key.
BASIC ENABLE
[PAUSE]
BASIC OFF
2.8.2 Basic File Browser
This parameter is to display the data files in the program file and basic file area. Using this function allows
you to check the file names installed in the block.
FILE MAINTENANCE
[PAUSE]
00 TEST.BAS
[RESTART]
01 TEST.DAT
[RESTART]
00 TEST.BAS
[PAUSE]
BASIC TRACE
2.8.3 Basic Trace Selection Mode
This parameter is to choose whether to enable the Basic trace function or not.
Usually, this function is set to OFF. When this function is enabled, it will be easier to find an erroneous
program as the program line number are displayed. However, the processing speed of BASIC interpreter
will be slower.
BASIC TRACE
[PAUSE]
TRACE OFF
[RESTART] or [FEED]
BASIC ON
[PAUSE]
FILE MAINTENANCE
Program file is displayed.
Data file is displayed.
Data files in the BASIC file area are displayed each time the
[RESTART] key is pressed.
Program file is displayed.
Basic file browser is completed by pressing the [PAUSE] key.
[RESTART] or [FEED]
TRACE ON
[PAUSE]
EXPAND MODE
Trace specification selection is completed by pressing
the [PAUSE] key.
2-71
EO13-33002
2.8 BASIC Setting