Table of Contents
Advertisement
e-STUDIO 16P
Service Error Codes
Software Service Error Code
ftware Service Error Code
The operator panel button has been pushed and a secondary y
service error has occurred indicating a software error.
Once the error code is displayed, if the operator panel button is
pushed again, the operator panel will display the service error
indication – all 6 indicator LEDs blinking. Continual pressing of the
operator panel button causes the LEDs to repeat in the following
order: :
1. Service error indication
2. Software service error code indication
3. Service error indication
Place the printer into the special function menu and run a print test.
See
"Using the Special Function Menu" on page 2-71
information. If the printer does not run printer diagnostics, replace
the controller board.
Codes
2-71
Diagnostic Information
for more
2-11
Advertisement
Table of Contents
