e-STUDIO 16P
Carriage Return Line Feed/Line Feed Carriage Return
Return Line Feed/Line Feed Carriage Return
(CRLF/LFCR)
This function controls whether or not the printer automatically
performs a carriage return after a line feed control command and
whether or not the printer automatically performs a line feed after a
carriage return control command.
Perform the following steps to change the CRLF/LFCR setting:
1. Enter the configuration mode. See
page 3-14
2. Perform a double click button press four times. This moves to
the CRLF/LFCR item on the configuration menu. The
RLF/LFCR item on the configuration menu. The
CRLF/LFCR (Error) LED comes on solid.
3. The current CRLF/LFCR setting is indicated by the Off/On/Auto o
(Press Button) LED.
•
When the LED is off, Auto CR after LF is off and Auto LF
after CR is off.
•
When the LED is on, Auto CR after LF is on and Auto LF
after CR is off.
•
When the LED is blinking, Auto CR after LF is off and Auto
LF after CR is on.
4. Perform a brief button press to select the CRLF/LFCR setting.
5. Perform a long button press. All LEDs blink once, indicating the
setting is saved.
6. Exit the configuration mode by turning the printer power off.
3-32
Service Manual
whether or not the printer automatically
for more information.
"Configuration Mode" on
EDs blink once, indicating the