Table of Contents
Advertisement
e-STUDIO 16P
Base Memory Service Error Code
Memory Service Error Code
The operator panel button has been pushed and a base memory
service error has occurred.
Once the error code is displayed, if the operator panel button is
pushed again, the operator panel will display the service error
indication – all 6 indicator LEDs blinking. Continual pressing of the
operator panel button causes the LEDs to repeat in the following
order:
1. Service error indication
2. Base memory service error code indication
3. Service error indication
Replace the controller board.
2-20
Service Manual
Ds blinking. Continual pressing of the
Advertisement
Table of Contents
