Toshiba e-STUDIO 16P Service Manual page 111

e-STUDIO 16P
Operation
Parallel–NPA Mode
Parallel–Protocol
Parallel–Mode 1
Parallel–Mode 2
Parallel–Strobe Adjust
Activate/Deactivate PPDS
Auto CRLF/LFCR
USB–Enable Port
USB–NPA Mode
Printer Buffer
The print buffer operation is only available while the printer is
operating in its normal mode and when the operator panel indicates
the printer is waiting.
Operator Panel Reset perator Panel Reset
Perform a long button press–for example, press and hold the button
until the printer posts the resetting printer indication (resetting printer
is indicated when all the lights on the operator panel are on).
Print Font Samples
The print font samples operation is not accessible through the
operator panel. Two PJL commands exist which allow the user to
obtain samples of the stored fonts.
3-18
Service Manual Manual
Mode
Configuration
Mode" on page
Configuration
Protocol" on page
Configuration
on page
Configuration
on page
Configuration
on page
Configuration
on page
Configuration
Line Feed/Line Feed Carriage
Return (CRLF/LFCR)
page
Configuration
page
Configuration
Mode" on page
JL commands exist which allow the user to
"Parallel NPA
3-24.
"Parallel
3-26.
"Parallel Mode 1 1 "
3-27.
"Parallel Mode 2"
3-28.
"Parallel Strobe"
3-29.
"Data Streams"
3-30.
"Carriage Return
(CRLF/LFCR)" on
3-32.
"USB Port" on
3-34.
"USB NPA
3-36.