Solid State Logic AWS 900+ Owner's Manual page 77

DAW Control GuidE
3. Edit Tools Menu
Edit Tools (EdTs) displays a list of available tools used by your DAW system. For example, in Pro Tools you can
select the Zoom, Trim, Select, Grabber, Smart Tool, Scrub and Pencil tools.
4. Edit Modes Menu
Edit Modes(EdMo) displays a list of available edit modes used by your DAW system. Within Pro tools® you can
select Shuffle, Slip, Spot and Grid modes.
5. Status/Group Menu
The Status/Group (StGr) menu contains several useful functions including:
Auto – Shows the Automation status of all channel faders on the channel fader scribble strips.
Monitor – Shows the monitor status of all 24 focused channels on the fader scribble strip. The labelling is as follows:
Auto
Auto input mode
Inpt
Input mode only
Aux
Auxiliary input channel
MIDI
MIDI channel
Mstr
Master Fader
Phase
Not implemented
Group – Shows the grouping status of all 24 focused channels on the console. A lowercase letter indicates that
the fader belongs to that group. An uppercase letter indicates that the fader belongs to multiple groups, with the
foremost group ID being displayed – eg.
Create – To create a fader group for your DAW, select SEL mode on the Master Control Panel then hold down the
SHIFT button and press the SEL buttons on any channels you wish to group. Finally press the CREATE button and
a new group will be created.
Suspend – Fader/Mix groups can be suspended at any time by selecting SUSPEND; they are now disengaged
from their respective grouping arrangements. Pressing SUSPEND a second time re-enables the groups.
AWS 900+ Owner's Manual
5 - 2 0
B
for groups b, c and e.