The Sel Menu; Storing Setups; Changing The Selected Setup; Deleting Setups - Solid State Logic AWS 900+ Owner's Manual

Total Recall
SEL menu
The SEL menu is the main file menu for the Total Recall system. The main window shows a list of stored
setups. The setup which is being displayed has the word 'selected' next to it.
Left hand rotary control
scrolls through the list
of setups
Press the SELECT key
or the rotary control
push-push switch to
chose which Setup is
displayed
Press STORE
key to store a
new Setup

Storing setups

Setups can be stored at any time using the STORE soft key. This saves the current desk setup to local memory.
If the desk is turned off these settings will be lost. TR setups must be saved to a sequencer or DAW
New setups are numbered starting at '1'. If a setup is deleted (see below) then its number will not be re-used.
The only exception to this is if all setups are deleted. The numbering will then restart from '1'.

Changing the selected setup

The left hand rotary control can be used to scroll through the list of TR setups. A yellow cursor indicates which
setup is currently chosen to be modified. Either the SELECT soft key or the rotary encoder's push-push switch
can be used to select the highlighted setup for display. The 'selected' message will appear next to the setup to
indicate that it is being displayed.

Deleting Setups

Setups can be deleted from memory by highlighting the setup up you wish to delete, holding down the DELETE
soft key and pressing the CONFIRM soft key.
6 - 2
AWS 900+ Owner's Manual
Total Recall
TR 1 selected
TR 2
TR 3
TR 4
TR 5
SELECT STORE
Misc TR
Sel Chan CmFb DynB StRt
Display Select
keys selects Channel
MIDI track for permanent storage.
TR
DELETE CONFIRM
SSL
Copy Save Load
COPY key SAVE and
LOAD keys
Copy mode permanently
store or load
setups to PC
selected shows which setup
is currently being displayed
Yellow cursor indicates
the chosen setup
Shows function of the
top four soft keys
Shows function of the
lower sixteen soft keys
Hold down DELETE then
press CONFIRM to delete
the highlighted setup