Solid State Logic AWS 900+ Owner's Manual page 138

Analogue workstation system
Hide thumbs Also See for AWS 900+:
Table of Contents

Advertisement

Four centre section cards are located beneath the large panel that contains the Talkback and Oscillator
controls, LCD display, and DAW soft keys. These are:
• 629651X1 6-Track Select
• 629652X1 2-Track Select & Monitor Inserts
• 629653X1 Gain and MDAC control/ Talkback and Listen
• 629654X1 Monitor Outputs
To access these cards, first remove the knob caps from the six rotary controls in the oscillator, listen mics etc.
area. Now remove the four screws from the panel. Lift this panel onto its side, taking care not to damage the
ribbon connecting it to the Motion Control panel. Beneath the panel is the metalwork containing the LCD
screen. Unscrew the two screws at the bottom of this and lift it to one side. The cards are in numerical order
from left to right: 651, 652, 653, 654.
The remaining five audio cards can be removed in a similar way to the channel strips. In order, from left to right,
they are:
• 629928X2 Centre Section Compressor/Mix/Rec/Foldback
• 629918X1 Dynamics 1
• 629918X2 Dynamics 2
• 629919X1 8-Track / Echo Returns
• 629919X2 Aux Bus / Echo Returns
Note: The two Dynamics cards (629918X1 and X2) are electronically identical. Three links (LK1, LK2 and LK3)
are fitted to Dynamics 1 to differentiate between the two modules. For fault finding purposes the two Dynamics
cards (629918X1 and X2) may be swapped with each other. When exchanging the two modules ensure that
only the module fitted in the Dynamics 1 slot has links LK1, LK2 and LK3 fitted.
AWS 900+ Owner's Manual
Troubleshooting
A - 1 5

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AWS 900+ and is the answer not in the manual?

Table of Contents