Solid State Logic AWS 900+ Owner's Manual page 116

Analogue workstation system
Hide thumbs Also See for AWS 900+:
Table of Contents

Advertisement

Snap Mode
Snap mode uses the fader touch sensor to control both the start and end of a fader update for fast hands on
changes to mix levels. When the fader is released it ramps back to the previous mix level at a user determined
rate, then returns to replay.
New Automation
Start Point
Original
Automation
AutoTakeover
To avoid a level jump when dropping out of write, AutoTakeover introduces nulling indicators in the scribble strip
to display the direction to move the fader to match the underlying mix level. When the fader crosses the current
mix level, it is automatically returned to replay and disconnected from the audio gain element. The fader returns
to following the mix data as soon as it is physically released.
New Automation
Start Point
Original
Automation
Cut Automation
Pressing a cut switch will toggle it's state and automatically start writing data. It can be returned to replay either
by rolling back or by selecting the soft Play key, then pressing the cut switch.
The state of the channel Cut switch is stored separately from the fader data. Cut data is stored regardless of the
current fader status unless channel Safe mode is selected. Whenever the Cut switch is in write, a '
displayed in the scribble strip above the fader.
Match followed by the Cut switch drops the channel into Write without changing the current state of the Channel
Cut. Match and Play are mutually exclusive. If one is active, selecting the alternate function cancels the first one.
Match and Play are automatically deselected after each operation unless the Latching option is enabled in the
Setup Menu.
When fader is released it
ramps back to previous mix
End Point
level
Glide time can be set in the
Setup menu if desired
Start position when fader first
touched
End Point
AWS 900+ Owner's Manual
End position when the fader is
released
Scribble strip indicates direction to
move the fader back to its original
position
Manual glide that will switch off
automation once past original
automation level
Start position when the fader is
first touched
AWSomation
*
' symbol is
7 - 9

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AWS 900+ and is the answer not in the manual?

Questions and answers

Table of Contents