Parts Counting - KERN GAB-P Series Operating Manual

7.7 Parts counting

Before the balance can count parts, it must know the average part weight
(i.e. reference). Proceed by putting on a certain number of the parts to be counted.
The balance determines the total weight and divides it by the number of parts (the
so-called reference quantity). Counting is then carried out on the basis of the
calculated average piece weight.
The higher the reference quantity the higher the counting exactness.
 Place reference quantity in weighing mode.
 Press
and the scales will change to quantity counting
mode; reference quantity of 10, „P 10" will appear.
 Use
to set the desired reference quantity (e.g. 100),
selectable 10, 20, 50, 100 and 200
 Acknowledge by
 An audio signal will sound shortly and a dashed line will be
displayed before the respective item number appears.
 Remove the items from the weighing plate. The balance is
from now in parts counting mode counting all units on the
weighing plate.
 To change between reference weight, total weight and
quantity, press the
 Back to Weighing mode by
Printout example:
2015/08/10 15:50
G 1.000kg
10g/pcs
PCS: 100pcs
GAB-P-BA-e-1613
.
key.
.
Date/time
Reference weight
Piece weight
Number of items
(example)

25