Grid Director 4036/2036 Installation Manual
Assembly in an iDataPlex Rack
Figure 48: 4036/2036 – Assembly in an iDataplex Rack
To mount the 4036/2036 in an iDataplex rack
1. Put the chassis on a flat surface.
2. On each side of the switch, attach the mount brackets to the rear of the chassis (connector
side) using two 8-32x1/4" pan head Philips screws.
Figure 49: Attaching the mount bracket
3. On each side of the switch, connect the mount holders on the front side of the switch
using two 8-32x1/4" pan head Philips screws.
NOTE: Standard rack clip nuts and rack screws are not provided.
61