Option 1; Figure 13: 4036/2036 - Option 1 Assembly - Mellanox Technologies Grid Director 4036 Installation Manual

Grid Director 4036/2036 Installation Manual
6.5.2

Option 1

The rail assembly described in this section enables front-to-rear switch installation within the
rack, meaning that the front of the switch faces the front of the rack. The front of the switch is
recessed 5 inches from the vertical rail of the rack to allow connecting the power cords from
the front side of the rack.
Figure 13: 4036/2036 – Option 1 Assembly
NOTE: Standard rack clip nuts and rack screws are not provided.

To mount the 4036/2036 in a rack using Option 1
1. Put the chassis on a flat surface.
35