Table 2: Rear Panel Components - Mellanox Technologies Grid Director 4036 Installation Manual

Table 2: Rear Panel Components

Component
InfiniBand Port
Connector
InfiniBand Port
Indicators (LEDs)
RS232 serial
interface
10/100/1000
Ethernet port
RJ-45 Connector
LEDs (Status
Indicators)
Chassis reset
button
USB connector
(Type A)
ID Tab
18
No.
36 4X QSFP InfiniBand connectors for passive copper cables, active copper cables,
active optical cables, and connect optical cables.
64 Indicates the physical and logical status of each InfiniBand port. (2 LEDs per
port)
1 D-sub -9 pin connector (serial interface) for CLI
1 Gigabit Ethernet auto-negotiating RJ-45 Connector for management
1Gbps/100Mbps/10Mbps (& LED). Provides out-of-band management interface
over a local network.

1 Pwr – System power status
4

1 PS/FAN LED

1 Info LED – Indicates the unit physical location (user-defined)

1 SM LED
1 When pressed for more than 1 second, resets the entire unit.
1 One USB 2.0 Host interface allows you to increase the CPU flash memory by a
connection to a standard Disk-On-Key device.
1 Includes the Switch Part and Serial Numbers
Function
Getting Started
Chapter 3