Option 2; Figure 28: 4036/2036 - Option 2 Assembly - Mellanox Technologies Grid Director 4036 Installation Manual

Hardware Installation
6.5.3

Option 2

The rail assembly described in this section enables rear-to-front switch installation within the
rack, meaning that the rear of the switch (InfiniBand connector side) faces the front of the rack.
This rear-to-front chassis installation is in-line with the vertical front rails of the rack.
Figure 28: 4036/2036 – Option 2 Assembly
NOTE: Standard rack clip nuts and rack screws are not provided.

To mount the 4036/2036 in a rack using Option 2
1. Put the chassis on a flat surface.
42